Electric Fireplace Wall Hanging Ideas
Unlike traditional gas or wood fireplaces, wall-mount electric ones are ready to be installed right out of the box. These fireplaces can be an excellent way to add the ambience of your home without the need for renovations or venting.
However, they usually require careful installation because they're typically heavy. Follow these steps to hang your new electric fireplace properly.
1. Connect the Brackets
A wall-mounted electric fireplace or recessed fire instantly transforms any room. It's the ideal solution for homes that don't have an existing fireplace opening or for apartment residents.
Choose the location where you'd like to place your electric fireplace. electric wall fires to select the ideal location that isn't susceptible to moisture and at a minimum of a few inches away from furniture, drapes, and other areas with a lot of traffic. Once you've located the perfect spot to mark the wall, you can use layout marks for the top and bottom plates of the fireplace frame.
Use a drill or other tool to drill exploratory holes into the wall. Examine for studs with a stud-detector and mark the wall with the position of the fireplace mounting brackets. Then, you can build the wall or patch and paint the drywall to prepare it for your fireplace installation.
Depending on electric wall fires of wall-mounted fire, you might be required to install the firebox and screen as one unit or separate them with an adjustable wall bracket. If you're unsure about your capability to tackle this task on your own, think about hiring an experienced general contractor or carpenter.
The majority of electric fireplaces come with an installation template to aid in the process, but you should also have an emery board and a pencil handy to help you precisely mark the area in which you'll mount the wall brackets. Make use of the template to ensure that the power cable from the fireplace will reach a nearby outlet to connect it.
Once the studs and fireplace frame are in place, you can install the drywall as seamless and flush as is possible for a sleek appearance. Add a trim piece to the bottom edge, and then sand and paint the entire frame to give it an elegant appearance.
You'll need to put the hooks or slots on the back of many electric fireplaces mounted on walls into the mounting brackets. Make sure that the slots and hooks are properly aligned prior to you connect the fire to wall brackets. Once the fire is set you can add other elements such as driftwood logs, crystal embers or decorative rocks.
2. Check the Bottom Bracket
The space above the mantel, fireplace, or chimney breast is the perfect spot to hang artwork. There is a delicate balance between an artistic arrangement and one that detracts the overall style of the fireplace.
A common rule of thumb is that a picture should not exceed 80% of the length of the fireplace or mantel it is placed over. This will keep it proportionate and will make it look nice on the wall. Other decorative ornaments and accessories placed on the mantel could influence the size and proportional guidelines.
If you're planning to put a photo above your electric fireplace, you must ensure that the frame is made from glass or other material that is able to withstand high temperatures. If you are unsure whether the frame is suitable, you can test the frame using a heat-sensitive cloth to see if it is suitable for this application.
The possibility of destroying artwork by smoke and scattered heat is a common concern when you display artworks in front of the flames of a fireplace. This is not an issue with a wood- or gas-powered fireplace. However when you are planning to install an electric wall fire it is essential to follow the instructions of the manufacturer.
Most electric fires have an installation bracket that can be attached to the wall using either hanging screws or wall-mounted fixing systems. It is recommended to drill exploratory hole in an area that is distinct from the wall prior installing your electric fire. You can then use a pipe and cable locater to ensure that there aren't any pipes or cables near the position of mounting.
If there are the electrical sockets, you can choose to mount your fire above the electrical socket or relocate it to a new location. If you decide to move it, be sure that the power cable is able to reach the electrical socket. This is important for older homes or homes with walls that are solid. In the event that it doesn't the electric fire will not perform as it should. Some models come with a template that will show you where to drill the holes to make the holes Some require a spirit level & pencil to mark the correct places on your wall.
3. Connect the Power Cord
You may need to move your plug socket to the back of the unit if you have installed a fireplace that is recessed. This can create a more elegant appearance. Check the fireplace first to make sure it works correctly.
The third way to mount an electric fireplace is framing the space and constructing it into the wall. This creates a polished traditional look, and also allows you to build an additional mantel. The owner's manual for your particular model will provide information regarding framing, the securement of the fireplace and wiring.
Mark the location of your new electric fireplace on the wall with a marker or pencil. Then, use a carpenter's level to ensure that the installation location is flat and level. You can also employ a stud locater to mark the location of studs, so that you know that you're drilling in a safe spot.
After you've marked your location of the installation then use your electric drill to create holes for the hanging screws or bracket screws. Be sure to follow the exact instructions in the owner's manual for this procedure, especially if you're installing the fireplace in a drywall. If you are unsure how to do it then you can ask an expert for assistance.
A cable organizer kit can be used to conceal power cords. These kits typically come with sleeves, clips or boxes that can be used to bundle cables. You can make use of wire snakes or fish tape to guide the cables. If you prefer not to cut into your wall then you can put in the power bridge kit for more secure and cleaner connections.
You can also camouflage cords using paintable wire covers or by adhering them to the wall. Make sure to keep the cover or tacks enough away from heat sources. This will avoid accidental contact and will protect the cord.
4. Connect the Adapter
A wall-mounted electric fireplace is a great choice for home renovations or those without the space or money to put in a gas fireplace. They are simple to hang and are ready to use straight out of the box. They're an ideal choice for those looking for an elegant, modern look or warmth from a fireplace. They can be hung on any wall, just like art, and they are electric with fan-powered heat.
Before beginning the actual installation process it's an excellent idea to make a list of all the equipment and tools you will need. Go through the user's manual for specific instructions about how to install your electric fire. Certain models require brackets to be screwed directly into the wall while others may feature mounting plates that slide into slots or hooks on the brackets. If you are installing a recessed model it is important to ensure that all combustible materials are removed from the area of installation. As a rule, you should keep these materials at a minimum of 3 feet from the front of the fireplace.
After you have inspected all the components, plug in your electric fireplace and ensure that it works. This is a crucial step, as it will ensure the flame effect screen and heater operate exactly as they were intended to. This will give you an idea of the final product in its final position.
Cover the cord after you are confident that it's working correctly. This will help keep the final product neat and neat. This can be accomplished by using wire covers that are paintable or you can choose to install a new outlet that allows you to place the cord behind the unit. This will give your fireplace a seamless finish.